Rubbers are important in many engineering applications because of their unique properties. These properties must be measured with appropriate test methods developed specifically for this class of materials. This book provides, in one volume, coverage of the procedures for measuring the whole range of physical properties of rubber.
Polymers have been used in agriculture and horticulture since the middle of the last century. There is a tremendous potential for using polymers in agriculture and our fields and garden would look very different if we did not use polymers in them. This review traces the history of polymer use, discusses the markets for polymers in these applications, and describes in detail the different types of polymers that can be used and their specific applications. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Rubber components are used in many demanding applications, from tyres and seals to gloves and medical devices, and failure can be catastrophic. This review of Rubber Product Failure outlines and illustrates the common causes of failure, while addressing ways of avoiding it. There has been increasing pressure to improve performance so that rubbers can be used at higher temperatures and in harsher environments. For example, the under-the-bonnet temperature has increased in some vehicles and new medical devices require longer lifetimes in potentially degrading biological fluids. The expectations of tyre performance in particular are increasing, and retreads have been in the spotlight for failures. The definition of failure depends on the application. For example, a racing car engine seal that lasts for one race may be acceptable, but in a normal car a life span of 10 years is more reasonable. If appearance is critical as in surface coatings and paints, then discolouration is failure, whilst in seals leakage is not acceptable. Each rubber product must be fit for the use specified by the consumer. Failure analysis is critical to product improvement. the cause of the problem can be much harder to find. It can range from a design fault to poor material selection, to processing problems, to manufacturing errors such as poor dimensional tolerances, to poor installation, product abuse and unexpected service conditions. The rubber technologist must become a detective, gathering evidence, understanding the material type and using deductive reasoning. Testing and analysis of failed materials and components add to the information available for failure analysis. For example, stored aged tyres appeared superficially to be alright for use, but on drum testing small cracks grew more quickly than in new tyres leading to rapid failure in service. Quality control procedures such as product inspection, testing and material quality checks can help to reach 100 percent reliability. In critical applications such as electricians' gloves for high voltage working, gloves are inspected before each use, while engine seals may be routinely replaced before the expected lifetime to avoid problems. in the literature is not high. However, several reviews have been written on specific products and references can be found at the end of this review. Around 400 abstracts from papers in the Polymer Library are included with an index. Subjects covered include tyre wear and failure, seals, engine components, rubber bonding failure, rubber failure due to chloramine in water, tank treads, gloves and condoms, medical devices and EPDM roofing membranes.
This book examines one aspect of the life and thought of Francis of Assisi, founder of the Franciscan monastic order. Contemporary interest in Francis has focused on his attitude toward nature. Sorrell argues persuasively that Francis' ideas can only be properly understood in their thirteenth-century context. Through close analysis of Francis' writings, Sorrell shows that many of Francis' beliefs concerning the proper relation of man to the natural world have their antecedents in scripture and in the medieval monastic tradition. Other Franciscan ideas and practices, however, appear entirely original; his nature mysticism, his concept of familial relationships with created things, his extension of Christian almsgiving to creatures. Sorrell insists, however, that only by seeing Francis in terms of the Western traditions in which he arose can we appreciate the true originality of this extraordinary figure, and the relevance of his thought to modern environmental concerns.
The properties of rubbers are subject to change as a result of ageing, ultimately to the point where the material is no longer capable of fulfilling its function. After a brief introduction to the main environmental and mechanical factors affecting performance, this review focuses on the thermo-oxidative ageing of rubber. It considers the methods of, and the published results from, both natural and accelerated tests. A major section of the report is devoted to exposure and test techniques with discussion of the methods of physical and chemical analysis. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.
Well-respected and widely regarded as the most comprehensive text in the field, Antibiotic and Chemotherapy, 9th Edition by Drs. Finch, Greenwood, Whitley, and Norrby, provides globally relevant coverage of all types of antimicrobial agents used in human medicine, including all antiviral, antiprotozoan and anthelminthic agents. Comprehensively updated to include new FDA and EMEA regulations, this edition keeps you current with brand-new information about antiretroviral agents and HIV, superficial and mucocutaneous myscoses and systemic infections, management of the immunocompromised patient, treatment of antimicrobial resistance, plus coverage of new anti-sepsis agents and host/microbe modulators. Reference is easy thanks to a unique 3-part structure covering general aspects of treatment; reviews of every agent; and details of treatments of particular infections. Offer the best possible care and information to your patients about the increasing problem of multi-drug resistance and the wide range of new antiviral therapies now available for the treatment of HIV and other viral infections. Stay current with 21 new chapters including the latest information on superficial and mucocutaneous mycoses, systemic infections, anti-retroviral agents, and HIV. Get fresh perspectives and insights thanks to 21 newly-authored and extensively re-written chapters. Easily access information thanks to a unique 3-part structure covering general aspects of treatment; reviews of every agent; and details of treatments of particular infections. Apply the latest treatments for anti-microbial organisms such as MRSA, and multi-drug resistant forms of TB, malaria and gonorrhea. Keep up on the latest FDA and EMEA regulations.
The object of this publication is to provide practical guidance on assessing the useful service life of rubbers. It describes test procedures and extrapolation techniques together with the inherent limitations and problems. This Guide seeks to be comprehensive but concentrates on the most common environmental effects causing degradation and the most important mechanical properties of rubbers. The test procedures used are outlined and the relevant d104books and International standards are referenced.
Annotation This report details the results of accelerated heat ageing studies undertaken on re-mixed samples of those materials studied for the natural ageing study and on the 20 new compounds chosen to represent polymers not available in 1958 and to reflect changes in compounding practice. In addition to those properties studied for the artificial weathering exposures compression set and dynamic properties were also measured.
In this classic textbook history of early medieval Europe, Roger Collins provides a succinct account of the centuries during which Europe changed from being an abstract geographical expression to a new culturally coherent, if politically divided, entity. This comprehensive new edition explores key topics such as the fall of the Roman Empire, the rise of both Christianity and Islam, the Vikings, and the expansion of Latin Christian culture into eastern Europe. Clear and insightful, this is an invaluable guide to an important era in the history of both Europe and the wider world. This is an ideal companion for students of History or European Studies taking modules on Early Medieval Europe or Europe in Late Antiquity. In addition, this is a useful reference work for postgraduate students, scholars and teachers of early medieval Europe. New to this Edition: - Fully updated, augmented and revised to take account of the latest scholarship and research on all aspects of the period it covers - Greater emphasis given to social and economic considerations, the peripheries of Europe, the rise and impact of Islam, art, architecture, books and the spread of learning - Extensively rewritten to make it more accessible for students
The authors combine research & practical experience to explain how to balance the dual role--enforcer & protector--performed by police in an ever-changing society.
These readers, designed to give students a deeper taste of special topics in criminal justice, include free access to InfoTrac® College Edition. The timely articles are selected by experts in each topic from within InfoTrac College Edition.
Improving Pupils Motivation Together provides a refreshing and much-needed focus on how motivation can be enhanced by teachers and teaching assistants working both individually and collaboratively. Written in an accessible and engaging manner, the book explores various theories of motivation from a range of perspectives, applying academic theory to real life classroom situations. Using a combination of case studies and empirical research, this book demonstrates how teachers and TAs can successfully enhance the motivation of their students through collaborative practice. Improving Pupils Motivation Together starts by introducing theories of learning and motivation and goes on to offer insight in areas including: Collaboration and ways to collaborate; Motivation and giftedness; Assessment for Learning; Learning goals and learning objectives; Common pupil responses; Research in Action. Improving Pupils Motivation Together is an ideal resource for both teachers and teaching assistants working with pupils who are difficult to motivate and who find learning challenging. Further, this book will be highly useful for teachers managing their support staff, and for trainee teachers looking to develop their skills in motivating and engaging pupils.
This book first reviews the case that brain oscillations not only are important for cognition, as long suspected, but also play a part in the expression of signs and symptoms of neuropsychiatric disorders. The cellular mechanisms of many of the clinically relevant oscillations have been studied by the authors and their colleagues, using in vitro slice methods as well as detailed computer simulations. A surprising insight is that gap junctions between principal neurons play an absolutely critical role in so many types of oscillation in neuronal populations; oscillations are not just the result of properties of individual neurons and their synaptic connections. Furthermore, the way in which gap junctions produce oscillations in the cortex is novel, involving as it does global properties of networks, rather than just the time constants of membrane currents. This insight has implications for therapeutics as well as for our understanding of normal brain functions.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.