Skyrocketing energy costs have spurred renewed interest in coal gasification. Currently available information on this subject needs to be updated, however, and focused on specific coals and end products. For example, carbon capture and sequestration, previously given little attention, now has a prominent role in coal conversion processes.This book approaches coal gasification and related technologies from a process engineering point of view, with topics chosen to aid the process engineer who is interested in a complete, coal-to-products system. It provides a perspective for engineers and scientists who analyze and improve components of coal conversion processes.The first topic describes the nature and availability of coal. Next, the fundamentals of gasification are described, followed by a description of gasification technologies and gas cleaning processes. The conversion of syngas to electricity, fuels and chemicals is then discussed. Finally, process economics are covered. Emphasis is given to the selection of gasification technology based on the type of coal fed to the gasifier and desired end product: E.g., lower temperature gasifiers produce substantial quantities of methane, which is undesirable in an ammonia synthesis feed. This book also reviews gasification kinetics which is informed by recent papers and process design studies by the US Department of Energy and other groups, and also largely ignored by other gasification books.• Approaches coal gasification and related technologies from a process engineering point of view, providing a perspective for engineers and scientists who analyze and improve components of coal conversion processes • Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes • Emphasizes the importance of the coal types fed to the gasifier and desired end products • Covers gasification kinetics, which was largely ignored by other gasification books - Provides a perspective for engineers and scientists who analyze and improve components of the coal conversion processes - Describes the fundamentals of gasification, gasification technologies, and gas cleaning processes - Covers gasification kinetics, which was largely ignored by other gasification books
It has been ten years since I presented the paper entitled “A new model and theory on yield and failure of materials under the complex stress state” at the Sixth Conference on Mechanical Behaviour of Materials held at Kyoto, Japan in 1991. The proceedings edited by Jono and Inoue were published by Pergamon Press in 1991. At that conference Professor Murakami and I were invited to act as the chairperson and co-chairperson of a session, and I presented the paper at another session. Few days before the conference, I had given a seminar regarding the tw- shear strength theory and the unified strength theory at Nagoya Technological University. These were the first two presentations of the unified strength theory, although I had completed the research of the unified strength theory in 1990. The paper “Twin-shear strength theory and its generalization” was published in the English edition of Sciences in China, the top journal in China, in 1985. The th original generalized twin-shear strength theory was presented at the 16 International Theoretical and Applied Mechanics Congress held at Copenhagen in Denmark and MPA (MaterialPrüfungsAnstalt) at Stuttgart University, Germany in 1984. After this Congress I visited the MPA and School of Civil Engineering of Stuttgart University, and gave a seminar regarding the generalized twin-shear strength theory at MPA of Stuttgart University. Professor Otto Mohr (1835–1918) has had worked at the Stuttgart University. He was a very good professor, his lectures aroused great interest in his students.
Generalized Plasticity deals with the plasticity of materials and structures. It is an expansion of the "Unified Strength Theory to Plasticity Theory", leading to a unified treatment of metal plasticity and plasticity of geomaterials, generally. It includes the metal plasticity for Tresca materials, Huber-von-Mises materials and twin-shear materials and the geomaterial plasticity for Mohr-Coulomb materials, generalized twin-shear materials and the Unified Strength Theory.
Limit and shakedown analysis for structures can provide a very useful tool for design and analysis of engineering structures. Structural Plasticity: Limit, Shakedown and Dynamic Plastic Analyses of Structure provides more general solutions of limit and shakedown analysis for structures by using a unified strength theory. A series of solutions of plates from circular, annular plates to rhombus plates and square plates, rotating discs and cylinders, pressure vessels are presented. These results encompass the Tresca-Mohr-Coulomb solution of structure as special cases. The unified solution, which cannot be obtained by using of single criterion, is suitable to more materials and structures. Maohong Yu is professor of Department of Civil Engineering at Xi'an Jiaotong University, China. He has authored 12 books including "Unified Strength Theory and Its Applications" and "Generalized Plasticity.
Limit and shakedown analysis for structures can provide a very useful tool for design and analysis of engineering structures. "Structural Plasticity - Limit, Shakedown and Dynamic Plastic Analyses of Structure" provides more general solutions of limit and shakedown analysis for structures by using a unified strength theory. A series of solutions of plates from circular, annular plates to rhombus plates and square plates, rotating discs and cylinders, pressure vessels are presented. These results encompass the Tresca-Mohr-Coulomb solution of structure as special cases. The unified solution, which cannot be obtained by using a single criterion, is suitable to more materials and structures. Maohong Yu is professor of Department of Civil Engineering at Xi'an Jiaotong University, China. He has authored 12 books including "Unified Strength Theory and Its Applications" and "Generalized Plasticity".
Generalized Plasticity deals with the plasticity of materials and structures. It is an expansion of the "Unified Strength Theory to Plasticity Theory", leading to a unified treatment of metal plasticity and plasticity of geomaterials, generally. It includes the metal plasticity for Tresca materials, Huber-von-Mises materials and twin-shear materials and the geomaterial plasticity for Mohr-Coulomb materials, generalized twin-shear materials and the Unified Strength Theory.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.