This volume and its companion Volume 1 chronicle the proceed ings of the International Symposium on Micellization, Solubiliza tion, and tficroemulsions held under the auspices of the Northeast Regional Meeting of the American Chemical Society in Albany, New York, August 8-11, 1976. The technical program consisted of 48 papers by 91 authors from twelve countries. The program was divided into six sessions, and Dr. Hartley delivered the Concluding Remarks. Subsequently, six more papers were contributed for the proceedings volumes with the result that these volumes contain Sl papers (three papers are not included for certain reasons) and are divided into seven parts. The first three parts are embodied in Volume I and the remaining four parts constitute Volume 2; each part is followed by a Discussion Section. Dr. Hartley's Concluding Remarks are in cluded in both volumes. When the idea of arranging a symposium on micelles was broached to me, I accepted it without an iota of hesitation. I had two op tions: either to make it a one- or two-sessions symposium, or bring together the global community actively carrying out research in this area. I opted for the latter as the subject was very timely and I knew that it would elicit very enthusiastic response. In order to broaden the scope of the symposium, I suggested that the theme of the symposium should be Micellizationy Solubilization and Microemulsions.
This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in terfacial aspects, joint design, mode of stress, external environ ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.
The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.
The contributions in this volume cover methods for removal of particle contaminants on surfaces. Several of these methods are well established and have been employed in industrial applications for a long time. However, the ever- higher demand for removal of smaller particles on newer substrate materials is driving continuous development of the established cleaning methods and alternative innovative methods for particle removal. This book provides information on the latest developments in this topic area. The purpose of the Developments in Surface Contamination and Cleaning series is to provide a state-of-the-art guide to the current knowledge of the behaviour of film-type and particulate surface contaminants, and cleaning methods. Each title has a particular topical focus, covering the key techniques and recent developments in the area. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning. A strong theme running through the series is that of surface contamination and cleaning at the micro and nano scales. Covers the latest techniques in areas such as removal of nanoparticles, especially important in the semiconductor industry, disk drives and microelectronics. The series as a whole represents the definitive reference on Surface Contamination and Cleaning An essential reference for industries where cleaning is critical: electronics, optics, pharmaceutical manufacturing, etc.
Providing critical insights into the two vital sectors of the Indian economy--agriculture and industry--this unique reference features contributions from noted economists and economic researchers. This guide to India's growing economy since independence features topics ranging from agricultural performance and crop insurance to industrial policy and trade liberalization. A comprehensive coverage of the issues, this remarkable study will interest students and economists alike.
This issue of Cardiac Electrophysiology Clinics covers remote monitoring in heart failure, atrial fibrillation, and stroke/TIA among other conditions. The issue also includes cardiac and vascular pressure sensors and leadless cardiac pacing, helping the clinician to keep current with the latest advances in technology.
This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings
Studies Chinese Economy Under Central Planning. Evaluates China`S Transition From Central Planning To Market Based Economy, And Supports Its Step-By-Step Approach To Implementation Of The Economic Reforms Programmes. Argues For State Intervention In The Market To Ensure Its Expansion, Competitiveness And Accessibility. Has Six Chapters And Four Annexures And A Large Number Of Tables.
The book will be an everlasting and invaluable reference for, academia, industry and planners specialized in georesouce and for those who need updated information and current research in the field. The book will also be equally useful for advance level students and research scholars throughout the world.
This book presents a modern and balanced approach while discussing the conceptual and practical aspects of vacuum science and technology. The chapters in the book are planned in systematic fashion from basic concepts through vacuum production and measurement, vacuum components, trouble shooting and then providing applications. It would be useful to students, both at the under-graduate and graduate levels in physics and also in various branches of engineering. In addition, it would be of value to practicing scientists and engineers who have to deal will vacuum science and technology.
This book incorporate papers describing new and exciting results and timely reviews integrating an immense amount of knowledge in the field. Frontiers of Earth Science, the inter-and intra-disciplinary volume sets out to imbibes sixty selectively invited research papers from distinguished earth scientists. The volume incorporate sections on Mineral deposits, Climate Change and Environment, Remote Sensing, Stratigraphy and Palaeobiology, Petrology, Groundwater and Seismology and Tectonics. The book is an everlasting and invaluable documents and reference for academia, industry and planners specialized in the field of the Earth Science and for those who need updated information of current research. The volume will also be equally significant for advance level students and research scholars throughout the world.
For more than a century, bioactive heterocycles have formed one of the largest areas of research in organic chemistry. They are important from a biological and industrial point of view as well as to the understanding of life processes and efforts to improve the quality of life. Heterogeneous Catalysis: A Versatile Tool for the Synthesis of Bioactiv
Economic Mineralization - the volume sets out to present various aspects of a very broad details of a narrow field of economic mineralization at a time when the competitively growing global economy and the pressing needs of the society are compelling economic geology to grow and pile of data is accumulating and opinions changing very rapidly. The volume incorporates papers, a resultant of information explosion and electrifying conceptual revolution in economic geology, describing the new and exciting results and timely reviews integrating and immense amount of knowledge in the field of geology, exploration, mining, environment, economics, geophysics and geochemistry that has bearing on economic mineralization. The book imbibes sections on crustal evolution and economic mineralization, economic mineralization of igneous application, economic mineralization of sedimentary affiliation, prospecting and exploration and mining, economics and environments. In all the five sections current concepts, problems and probable trends of future research are highlighted. This book will be an invaluable everlasting reference for both industry and academia specializing in economic mineralization and for those who need updated information and current research in the field. It will be equally useful for advance level geology and mining students and research scholars throughout the world.
The book provides a comprehensive and easily accessible reference source covering all important aspects of particle adhesion and removal. The core objective is to cover both fundamental and applied aspects of particle adhesion and removal with emphasis on recent developments. Among the topics to be covered include: 1. Fundamentals of surface forces in particle adhesion and removal. 2. Mechanisms of particle adhesion and removal. 3. Experimental methods (e.g. AFM, SFA,SFM,IFM, etc.) to understand particle-particle and particle-substrate interactions. 4. Mechanics of adhesion of micro- and nanoscale particles. 5. Various factors affecting particle adhesion to a variety of substrates. 6. Surface modification techniques to modulate particle adhesion. 7. Various cleaning methods (both wet & dry) for particle removal. 8. Relevance of particle adhesion in a host of technologies ranging from simple to ultra-sophisticated.
This and its companion Volume 2 document the proceedings of the International Symposium on Physicochemical Aspects of Polymer Surfaces held under the auspices of the American Chemical Society in New York City, August 23-28, 1981. This event was sponsored by the Division of Colloid and Surface Chemistry and the Divisions of Organic Coatings and Plastics Chemistry, and Industrial and Engineering Chemistry were the cosponsors. The study of polymer surfaces is important from both funda mental and applied points of view. The applications of polymers are legion and wheresoever polymers are used, their surface char acteristics, inter alia, are of great concern and importance; and the areas where polymers find applications range from microelec tronics to prosthetics. In the last decade or so, the availabil ity of various sophisticated surface analytical techniques, par ticularly ESCA, has been a boon in enhancing our knowledge of polymer surfaces. This Symposium was designed to bring together scientists and technologists interested in all aspects of polymer surfaces, to provide a forum for discussion of various ramifications of poly mer surfaces, to discover the latest developments, to provide an opportunity for cross-pollination of ideas, and to highlight areas which are in astate of rapid development and those which need intensified efforts. If the comments from attendees is any barometer of the success of an event, then this Symposium was a grand success and the above objectives were amply fulfilled.
This book chronicles the proceedings of the Second Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 20th Annual Fine Particle Society meeting in Boston, August 21-25, 1989. As this second symposium was as successful as the prior one, so we have decided to hold symposia on this topic on a regular (biennial) basis and the third symposium in this series is scheduled to be held at the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. l As pointed out in the Preface to the prior volume in this series that recently there has been tremendous concern about yield losses due to unwanted particles, and these unwelcome particles can originate from a legion of sources, including process gases and liquids. Also all signals indicate that in the future manufacture of sophisticated and sensitive microelectronic components (with shrinking dimensions) and other precision parts, the need for detection, characterization, analysis and control of smaller and smaller particles will be more intensified.
This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesion Surface (physical or chemical) characterization of materials as it pertains to adhesion Surface cleaning as it pertains to adhesion Ways to improve adhesion Unraveling of interfacial interactions using an array of pertinent techniques Characterization of interfaces / interphases Polymer-polymer adhesion Metal-polymer adhesion (metallized polymers) Polymer adhesion to various substrates Adhesion of thin films Adhesion of underfills Adhesion of molding compounds Adhesion of different dielectric materials Delamination and reliability issues in packaged devices Interface mechanics and crack propagation Adhesion measurement of thin films and coatings
In this series Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination. The expert contributions in this volume cover important fundamental aspects of surface contamination that are key to understanding the behavior of specific types of contaminants. This understanding is essential to develop preventative and mitigation methods for contamination control. The coverage complements the treatment of surface contamination in vol.1, Fundamental and Applied Aspects. This volume covers: Sources and Generation of Particles; Manipulation Techniques for Particles on Surfaces; Particle Deposition and Rebound; Particle Behavior in Liquid Systems; Biological and Metallic Contamination; and includes a comprehensive list of current standards and resources. - Comprehensive coverage of innovations in surface contamination and cleaning - Written by established experts in the contamination and cleaning field - Each chapter is a comprehensive review of the state of the art - Case studies included
This book documents the proceedings of the Fifth International Symposium on this topic, held in Toronto. The book is divided into two parts: Part 1: Surface Modification Techniques; Part 2: Adhesion Improvement to Polymer Surfaces.Various ways to modify a host of polymer surfaces for a variety of purposes are covered in this book, with emphasis on
The book provides a comprehensive and easily accessible reference source covering all important aspects of particle adhesion and removal. The core objective is to cover both fundamental and applied aspects of particle adhesion and removal with emphasis on recent developments. Among the topics to be covered include: 1. Fundamentals of surface forces in particle adhesion and removal. 2. Mechanisms of particle adhesion and removal. 3. Experimental methods (e.g. AFM, SFA,SFM,IFM, etc.) to understand particle-particle and particle-substrate interactions. 4. Mechanics of adhesion of micro- and nanoscale particles. 5. Various factors affecting particle adhesion to a variety of substrates. 6. Surface modification techniques to modulate particle adhesion. 7. Various cleaning methods (both wet & dry) for particle removal. 8. Relevance of particle adhesion in a host of technologies ranging from simple to ultra-sophisticated.
The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.
The contributions in this volume cover methods for removal of particle contaminants on surfaces. Several of these methods are well established and have been employed in industrial applications for a long time. However, the ever- higher demand for removal of smaller particles on newer substrate materials is driving continuous development of the established cleaning methods and alternative innovative methods for particle removal. This book provides information on the latest developments in this topic area. The purpose of the Developments in Surface Contamination and Cleaning series is to provide a state-of-the-art guide to the current knowledge of the behaviour of film-type and particulate surface contaminants, and cleaning methods. Each title has a particular topical focus, covering the key techniques and recent developments in the area. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning. A strong theme running through the series is that of surface contamination and cleaning at the micro and nano scales. Covers the latest techniques in areas such as removal of nanoparticles, especially important in the semiconductor industry, disk drives and microelectronics. The series as a whole represents the definitive reference on Surface Contamination and Cleaning An essential reference for industries where cleaning is critical: electronics, optics, pharmaceutical manufacturing, etc.
This volume documents the proceedings of the International Symposium on Adhesive Joints: Formation, Characteristics and Testing held under the auspices of the Division of Polymer Mater ials:Science and Engineering of the American Chemical Society in Kansas City, MO, September 12-17, 1982. There is a myriad of applications (ranging from aerospace to surgery) where adhesives are used to join different materials, and concomitantly the understanding of the behavior of adhesive joints becomes very important. There are many factors which can influence the behavior of adhesive joints, e.g., substrate preparation, in terfacial aspects, joint design, mode of stress, external environ ment, etc., and in order to understand the joint behavior in a holistic manner, one must take due cognizance of all these germane factors. So this symposium was planned to address not only how to make acceptable bonds but their characterization, durability and testing were also accorded due consideration.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.