There are growing concerns that 25 years after the launch of the HIPC debt relief initiative, many low-income countries are again facing high debt vulnerabilities. This paper compares debt vulnerabilities in LICs today versus those on the eve of the HIPC Initiative and examines challenges to a similarly designed debt-relief framework. While solvency and liquidity indicators in most LICs have steadily worsened in recent years, they remain substantially better on average than they were on the eve of HIPC in the mid-1990s. This said, if current trends persist, debt vulnerabilities in LICs could (but would not necessarily) reach levels comparable to the pre-HIPC era over the medium- to long-term. Today’s more complex creditor landscape makes coordination challenging. It is therefore essential for countries to reduce today’s debt burdens promptly through economic reform, lowering the cost of financing, and debt restructuring on a case-by-case basis. The international community should also step up efforts to improve debt restructuring processes, including the G20 Common Framework, to ensure that debt relief is delivered in a timely and efficient manner where it is needed.
This book examines the transmission processes of the Aristotelian Mechanics. It does so to enable readers to appreciate the value of the treatise based on solid knowledge of the principles of the text. In addition, the book’s critical examination helps clear up many of the current misunderstandings about the transmission of the text and the diagrams. The first part of the book sets out the Greek manuscript tradition of the Mechanics, resulting in a newly established stemma codicum that illustrates the affiliations of the manuscripts. This research has led to new insights into the transmission of the treatise, most importantly, it also demonstrates an urgent need for a new text. A first critical edition of the diagrams contained in the Greek manuscripts of the treatise is also presented. These diagrams are not only significant for a reconstruction of the text but can also be considered as a commentary on the text. Diagrams are thus revealed to be a powerful tool in studying processes of the transfer and transformation of knowledge. This becomes especially relevant when the manuscript diagrams are compared with those in the printed editions and in commentaries from the early modern period. The final part of the book shows that these early modern diagrams and images reflect the altered scope of the mechanical discipline in the sixteenth century.
This volume contains fundamental knowledge regarding the structure and mechanisms of organic sulfur chemistry. Topics include sulfur bondings, effects of sulfur groups, stereochemistry around sulfur, substitution, ligand coupling within s-sulfurane, oxidation, reduction and rearrangement. References in this work total over 2,300. Anyone with an interest in organic sulfur chemistry will find this book to be fascinating reading.
This book is about television in Latin America. Its national and regional industries create most television programming there within genres developed over time in the region. However, part of the programming has always come from the U.S., Europe and elsewhere. With cable, satellite and now streaming TV, that inflow of foreign programming has increased substantially. While many in the audience still prefer national or regional programs for their cultural proximity, an increasing number among the upper-middle and middle classes, particularly the young, are turning to the new foreign services, like Netflix, Amazon and Disney for class distinction, cosmopolitanism or other motives. Among the television industries, global, regional and national actors are creating a variety of programs and channels (broadcast, pay-TV and streaming) to segment and appeal to different parts of the audience.
This book comprehensively addresses the sources of allergenic contaminants in foods, their fate during processing, and the specific measures that need to be taken to minimize their occurrence in foods. The book provides up-to-date information on the nine major allergens (as well as other emerging allergens) and practical guidelines on how these allergens can be identified and controlled during production and processing. Starting with an introduction to food allergens, the book follows with sections on food allergen management during production and processing, guidelines for the processing of specific allergen-free foods, techniques for hypo-allergenization and allergen detection, and allergen-free certification.
The evidence that omega-3 fatty acids are essential for human development and most helpful to achieve good health throughout life is clearly documented by Dr. Joyce Nettleton in her new book Omega-3 Fatty Acids and Health. Omega 3 fatty acids are produced by the plants of the land and sea. The tissues of the body require the omega-3 fatty acids for their proper functioning just as they also need the omega-6 essential fatty acids. It is probable in man's evolutionary development that there has always been the proper balance between these two groups of essential fatty acids, but in the modern era with the provision of inexpensive vegetable oils it is possible that the pendulum for increased dietary omega-6 fatty acids in the form of linoleic acid has swung too far and the intake ofomega-3 fatty acids has actualIy declined. In particular, the 22 carbon omega 3 fatty acid, docosahexaenoic acid, which has six double bonds, is important in the membranes of brain cells, heart muscle cells, the rods and cones of the retina and spermatozoa. Docosahexaenoic acid is found only in foods such as fish and other sea life, having been synthesized by the phytoplankton of the waters. An outright deficiency of omega-3 fatty acids has led to a number of distur bances in animals and human infants such as impaired vision, abnormalities of the electroretinogram, of the eye and various behavioral aberrations.
Neuromuscular Disease Management and Rehabilitation, Part I: Diagnostic and Therapy Issues, an Issue of Physical Medicine and Rehabilitation Clinics - E-Book
Neuromuscular Disease Management and Rehabilitation, Part I: Diagnostic and Therapy Issues, an Issue of Physical Medicine and Rehabilitation Clinics - E-Book
Neuromuscular disease is a broad term that encompasses many diseases and ailments that either directly or indirectly impair the function of the body's muscle system, via the nerves. This issue of PMR will provide an overview of current treatments and therapies for a variety of diseases. The GEs have gone through every issue published since 1998, and these 23 chapters will be meant to fill the numerous gaps in PMR's coverage of the field over the past decade. The issue will include chapters on different treatment techniques, such as exercises, stretches, and nutrition. It will also provide chapters focusing on specific areas of the body, specific conditions, and an update on mobility technology for those with NMDs.
While there are numerous Lean Certification programs, most companies have their own certification paths whereby they bestow expert status upon employees after they have participated in or led a certain number of kaizen events. Arguing that the number of kaizen events should not determine a person's expert status, The Lean Practitioner's Field Book: Proven, Practical, Profitable and Powerful Techniques for Making Lean Really Work outlines a true learning path for anyone seeking to understand essential Lean principles. The book includes a plethora of examples drawn from the personal experiences of its many well-respected and award-winning contributors. These experts break down Lean concepts to their simplest terms to make everything as clear as possible for Lean practitioners. A refresher for some at times, the text provides thought-provoking questions with examples that will stimulate learning opportunities. Introducing the Lean Practitioner concept, the book details the five distinct Lean Practitioner levels and includes quizzes and criteria for each level. It highlights the differences between the kaizen event approach and the Lean system level approach as well as the difference between station balancing and baton zone. This book takes readers on a journey that begins with an overview of Lean principles and culminates with readers developing professionally through the practice of self-reliance. Providing you with the tools to implement Lean tools in your organization, the book includes discussions and examples that demonstrate how to transition from traditional accounting methods to a Lean accounting system. The book outlines an integrated, structured approach identified by the acronym BASICS (baseline, analyze, suggest solutions, implement, check, and sustain), which is combined with a proven business strategy to help ensure a successful and sustainable transformation of your organization.
Riemannian Holonomy Groups and Calibrated Geometry covers an exciting and active area of research at the crossroads of several different fields in mathematics and physics. Drawing on the author's previous work the text has been written to explain the advanced mathematics involved simply and clearly to graduate students in both disciplines.
This book studies generalized Donaldson-Thomas invariants $\bar{DT}{}^\alpha(\tau)$. They are rational numbers which `count' both $\tau$-stable and $\tau$-semistable coherent sheaves with Chern character $\alpha$ on $X$; strictly $\tau$-semistable sheaves must be counted with complicated rational weights. The $\bar{DT}{}^\alpha(\tau)$ are defined for all classes $\alpha$, and are equal to $DT^\alpha(\tau)$ when it is defined. They are unchanged under deformations of $X$, and transform by a wall-crossing formula under change of stability condition $\tau$. To prove all this, the authors study the local structure of the moduli stack $\mathfrak M$ of coherent sheaves on $X$. They show that an atlas for $\mathfrak M$ may be written locally as $\mathrm{Crit}(f)$ for $f:U\to{\mathbb C}$ holomorphic and $U$ smooth, and use this to deduce identities on the Behrend function $\nu_\mathfrak M$. They compute the invariants $\bar{DT}{}^\alpha(\tau)$ in examples, and make a conjecture about their integrality properties. They also extend the theory to abelian categories $\mathrm{mod}$-$\mathbb{C}Q\backslash I$ of representations of a quiver $Q$ with relations $I$ coming from a superpotential $W$ on $Q$.
Here is an informative book that provides theoretical perspectives on the study of fetal movement and introduces observational assessments that can be used in fetal research. It provides research tools that can be used to delineate early patterns of movement, preparing therapists for neonatal intervention and leading to a better understanding of functional activity of the fetus. Concepts in Fetal Movement Research describes various ideas in fetal development and contains original research on a variety of topics, including: the way in which events experienced in utero help neonatal interaction with parents inductive and deductive approaches to assessment development scapular movement activity/inactivity of the 12-20 week old fetus two different research tools for assessing fetal movement. future directions for research by physical therapists in collaboration with other researchers Researchers, clinicians, obstetricians, radiologists, sonographers, and neonatologists will all find this book full of helpful information. Concepts in Fetal Movement Research is an invaluable guide for both their research and their day-to-day work with patients.
Joint Replacement in the Human Body provides a comprehensive exploration of artificial joint designs. The book's primary focus is to introduce readers to the diverse landscape of artificial joint technologies while offering insights into their historical development. This book is divided into three sections, each addressing specific aspects of joint replacements. The first section delves into artificial joints of the lower limb, including the hip, knee, and ankle. In the subsequent section, the book explores upper limb replacements, covering joints such as the shoulder, elbow, wrist, finger, and thumb.The third section tackles broader themes like biotribology, regulatory aspects of joint replacements, examines noteworthy case studies like metal-on-metal hips, and addresses joint replacements not easily categorized in the previous sections, such as spinal total disc replacements. This book offers a critical assessment of the diverse and evolving design concepts currently in use, ranging from established metal-on-polymer joints to innovative biomimetic solutions. This book is designed to swiftly equip readers with a deep understanding of contemporary joint replacements and the immediate and long-term challenges they present. - Covers all the joints that are replaced in the human body, including the hip all the way to the toes - Provides a thorough examination of vastly diverse implanted design concepts, ranging from the established metal-on-polymer approach to innovative biomimetic designs - Describes joint biomechanics and their corresponding replacements, followed by a description of future challenges appropriate to each joint and current debates
In the topically organized Child Development: An Active Learning Approach, Fourth Edition, authors Laura E. Levine and Joyce Munsch take students on an active journey toward understanding children and their development. Active Learning activities integrated throughout the text capture student interest and turn reading into an engaged learning process. Through the authors’ active learning philosophy, students are challenged to test their knowledge, confront common misconceptions, relate the material to their own experiences, and participate in real-world activities independently and with children. Because consuming research is equally important in the study of child development, Journey of Research features provide both historical context and its links to today’s cutting-edge research studies. Students will discover the excitement of studying child development while gaining skills they can use long after course completion. This title is accompanied by a complete teaching and learning package.
Lean is about building and improving stable and predictable systems and processes to deliver to customers high-quality products/services on time by engaging everyone in the organization. Combined with this, organizations need to create an environment of respect for people and continuous learning. It’s all about people. People create the product or service, drive innovation, and create systems and processes, and with leadership buy-in and accountability to ensure sustainment with this philosophy, employees will be committed to the organization as they learn and grow personally and professionally. Lean is a term that describes a way of thinking about and managing companies as an enterprise. Becoming Lean requires the following: the continual pursuit to identify and eliminate waste; the establishment of efficient flow of both information and process; and an unwavering top-level commitment. The concept of continuous improvement applies to any process in any industry. Based on the contents of The Lean Practitioners Field Book, the purpose of this series is to show, in detail, how any process can be improved utilizing a combination of tasks and people tools and introduces the BASICS Lean® concept. The books are designed for all levels of Lean practitioners and introduces proven tools for analysis and implementation that go beyond the traditional point kaizen event. Each book can be used as a stand-alone volume or used in combination with other titles based on specific needs. Each book is chock-full of case studies and stories from the authors’ own experiences in training organizations that have started or are continuing their Lean journey of continuous improvement. Contents include valuable lessons learned and each chapter concludes with questions pertaining to the focus of the chapter. Numerous photographs enrich and illustrate specific tools used in Lean methodology. Sustaining Lean: Creating a Culture of Continuous Improvement focuses on standard work audits, training, Lean Practitioner certification, Hoshin planning, Lean Leadership, and how to run effective meetings. The authors discuss the cultural transformation which must occur to create a Lean culture by understanding what the components are in this culture. The importance of training and the value of the person are also discussed, as is what it takes to be a Lean leader.
This is an introduction to a very active field of research, on the boundary between mathematics and physics. It is aimed at graduate students and researchers in geometry and string theory. Proofs or sketches are given for many important results. From the reviews: "An excellent introduction to current research in the geometry of Calabi-Yau manifolds, hyper-Kähler manifolds, exceptional holonomy and mirror symmetry....This is an excellent and useful book." --MATHEMATICAL REVIEWS
Nuclear Engineering: A Conceptual Introduction to Nuclear Power provides coverage of the introductory, salient principles of nuclear engineering in a comprehensive manner for those entering the profession at the end of their degree. The nuclear power industry is undergoing a renaissance because of the desire for low-carbon baseload electricity, the growing population, and environmental concerns about shale gas, so this book is a welcomed addition to the science. In addition, users will find a great deal of information on the change in the industry, along with other topical areas of interest that are uniquely covered. Intended for undergraduate students or early postgraduate students studying nuclear engineering, this new text will also be appealing to scientifically-literate non-experts wishing to be better informed about the 'nuclear option'. - Presents a succinct and clear explanation of the key facts and concepts on how nuclear engineering power systems function and how their related fuel supply cycles operate - Provides full coverage of the nuclear fuel cycle, including its scientific and historical basis - Describes a comprehensive range of relevant reactor designs, from those that are defunct, current, and in plan/construction for the future, including SMRs and GenIV - Summarizes all major accidents and their impact on the industry and society
This introduction to Reiki outlines its history and the authors' lineage to its tradition and principles. Also covered are legal and ethical aspects of the treatment and examples of Reiki healing miracles. Hand placements and before-and-after effects are illustrated.
Get up to speed on how to properly assess the care needs of today’s culturally diverse clientele with Transcultural Nursing: Assessment & Intervention, 7th Edition. Centering on Giger's unique transcultural model of clear, easy-to-apply assessment and intervention strategies for the clinical setting, this one-of-a-kind resource will help you learn to identify the six key cultural phenomena used in caring for clients from different backgrounds (communication, space, social organization, time, environmental control, and biological variations), and show you how to apply these phenomena to a variety of individuals in different cultures. UNIQUE! Giger & Davidhizar's Transcultural Assessment Model devotes a full chapter to each of the six aspects of cultural assessment (communication, space, social organization, time, environmental control, and biologic variations) to help readers apply this model to any client of any culture — even those not covered in the text. 2010 census data is incorporated through the book to provide the most current analysis of demographic trends. UNIQUE! Sample care plans demonstrate how to apply principles to specific client needs. UNIQUE! Discussion of the spiritual component provides a more holistic, integrated approach to culture and assessment. Case studies and critical thinking questions help readers apply the assessment framework in practice. Clarification of biologic variations for select cultural groups raises readers’ awareness of potential risks/influences on client health. NEW! Completely revised cultural chapters reflect the shifting experiences of various cultural groups in our society.
2010 census data is incorporated through the book to provide the most current analysis of demographic trends. Completely revised cultural chapters reflect the shifting experiences of different cultural groups in our society. NEW! 6 additional cultural chapters on Nigerians, Uganda Americans, Jordanian Americans, Cuban Americans, Amish Americans, and Irish Americans
- NEW! Updated information on Antidiabetic Agents (orals and injectables) has been added throughout the text where appropriate. - NEW! Updated content on Anticoagulant Agents is housed in an all-new chapter. - NEW! Colorized abbreviations for the four methods of calculation (BF, RP, FE, and DA) appear in the Example Problems sections. - NEW! Updated content and patient safety guidelines throughout the text reflects the latest practices and procedures. - NEW! Updated practice problems across the text incorporate the latest drugs and dosages.
During the Silent Era, when most films dealt with dramatic or comedic takes on the "boy meets girl, boy loses girl" theme, other motion pictures dared to tackle such topics as rejuvenation, revivication, mesmerism, the supernatural and the grotesque. A Daughter of the Gods (1916), The Phantom of the Opera (1925), The Magician (1926) and Seven Footprints to Satan (1929) were among the unusual and startling films containing story elements that went far beyond the realm of "highly unlikely." Using surviving documentation and their combined expertise, the authors catalog and discuss these departures from the norm in this encyclopedic guide to American horror, science fiction and fantasy in the years from 1913 through 1929.
Mechanical Circulatory Support: Principles and Applications offers innovative approaches to complex clinical scenarios and represents the current state-of-the-art for managing patients on mechanical circulatory support devices. Topics are presented in a concise fashion, making it a practical resource for care givers who need a user's manual in the heat of the moment during patient care as well as a reference for a better understanding of the unique components of every device available for human use. This book provides a comprehensive, up-to-date analysis of the most relevant issues facing health care providers in the management of advanced heart failure. With content that features patient selection strategies, implantation techniques, device specific considerations, and management of clinical challenges in the post-operative setting, this textbook offers evidence-based answers to the complex questions facing nurses, perfusionists, advanced practice providers, and physicians.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.