Aimed at US audience - architects (113,000), civil engineers (228,000), and universities and colleges offering structural engineering programs. This work reflects the bridge design code changes and the newest ASCE [American Association of Civil Engineers] design methods. It uses SI units throughout for international usage.
Coal provides almost 40% of the world's electricity, and despite the understandable concern with respect to the environmental impact associated with coal use, forecasts from the International Energy Agency predict, that worldwide coal use will increase by up to 2% per annum until the year 2OlO. Faced with this increase, it is clearly important that the most efficient and environmentally acceptable clean coal technologies are available. This book is comprised of the proceedings of the Engineering Foundation Conference held in June 1993 in England. The objective of the conference was to present ideas on methods of predicting and reducing the effects of ash deposition in coal conversion systems, highlighting the problems experienced in industry, considering both utilities and industrial plants, and providing a view of the technology of coal ash deposition and its impact. Better techniques are needed to reduce the impact of ash deposition in coal fired plants, and these proceedings should form a reference document for anyone either experiencing slagging or actively engaged in trying to understand or eliminate the phenomenon.
This book examines water resource management in China’s electric power sector and the implications for energy provision in the face of an emerging national water crisis and global climate change. Over 75% of China’s current electricity comes from coal. Coal-fired power plants are reliant on water, with plants using significant volumes of water every year, yet water resources are unevenly distributed. In the face of serious environmental concerns and increasing electricity demand, this book examines the environmental impacts that coal power plants have on water resources and the impact water availability has on the electricity sector in a country with a significant number of water-scarce provinces and a large number of power plants located on inland waterways. It discusses the water impacts and constraints for transforming the electric power sector away from coal to renewable energy sources, such as hydropower and concentrated solar power. The book adopts a mix-method approach, combining a plant-level quantitative analysis on water impacts and dependencies in China’s electricity sector and a qualitative analysis of relevant institutions in both sectors. By reviewing policy and institution cases in China’s water and electricity sectors, the book provides important recommendations calling for coordinated institutions to shift away from the current paradigm where water and electricity are governed independently. Enriching the water-energy nexus literature, this book will be of great interest to students and scholars working on water resource management, energy industries and Chinese environmental policy, as well as policymakers and practitioners in those fields.
Bridge engineering essentials—fully updated to reflect the latest standards and regulations This thoroughly revised resource combines the latest LRFD bridge engineering standards with cutting-edge maintenance and rehabilitation techniques, enabling you to successfully address today’s challenging infrastructure projects. The book features cutting-edge analysis, design, and construction practices along with proven, cost-effective maintenance and repair methods. Bridge Engineering: Design, Rehabilitation, and Maintenance of Modern Highway Bridges, Fourth Edition, examines the entire lifecycle of a bridge, from inception, design, and construction to long-term maintenance and management. Two brand-new chapters cover foundations and superstructure rehabilitation. Real-world case studies and hundreds of helpful photos and illustrations are also included. • Fully aligns with the 7th Edition of AASHTO’s LRFD Bridge Design Specifications • All examples and equations are presented in both S.I. and U.S. units • Written by a pair of experienced civil engineers
The state of the art in highway bridge engineering Fully updated with the latest codes and standards, including load and resistance factor design (LRFD), Bridge Engineering, Third Edition covers highway bridge planning, design, construction, maintenance, and rehabilitation. This thoroughly revised reference contains cutting-edge analytical, design, and construction practices, the most current information on new materials and methods, and proven, cost-effective maintenance and repair techniques. Real-world case studies and hundreds of helpful photos and illustrations are also included in this practical resource. BRIDGE ENGINEERING, THIRD EDITION FEATURES COMPLETE COVERAGE OF: Highway bridge structures Project inception Project funding Design standards Bridge inspection and site survey Physical testing As-built plans and other record data Superstructure types Deck types Wearing surface types Deck joint types Design loads Design methods Internal forces Load distribution Concrete deck slabs Composite steel members Plate girder design Continuous beams Protecting steel superstructures Load rating Prestressed concrete Substructure design Abutments Piers Bearings Managing the design process Contract documents Bridge management systems
Bridge engineering essentials—fully updated to reflect the latest standards and regulations This thoroughly revised resource combines the latest LRFD bridge engineering standards with cutting-edge maintenance and rehabilitation techniques, enabling you to successfully address today’s challenging infrastructure projects. The book features cutting-edge analysis, design, and construction practices along with proven, cost-effective maintenance and repair methods. Bridge Engineering: Design, Rehabilitation, and Maintenance of Modern Highway Bridges, Fourth Edition, examines the entire lifecycle of a bridge, from inception, design, and construction to long-term maintenance and management. Two brand-new chapters cover foundations and superstructure rehabilitation. Real-world case studies and hundreds of helpful photos and illustrations are also included. • Fully aligns with the 7th Edition of AASHTO’s LRFD Bridge Design Specifications • All examples and equations are presented in both S.I. and U.S. units • Written by a pair of experienced civil engineers
The state of the art in highway bridge engineering Fully updated with the latest codes and standards, including load and resistance factor design (LRFD), Bridge Engineering, Third Edition covers highway bridge planning, design, construction, maintenance, and rehabilitation. This thoroughly revised reference contains cutting-edge analytical, design, and construction practices, the most current information on new materials and methods, and proven, cost-effective maintenance and repair techniques. Real-world case studies and hundreds of helpful photos and illustrations are also included in this practical resource. BRIDGE ENGINEERING, THIRD EDITION FEATURES COMPLETE COVERAGE OF: Highway bridge structures Project inception Project funding Design standards Bridge inspection and site survey Physical testing As-built plans and other record data Superstructure types Deck types Wearing surface types Deck joint types Design loads Design methods Internal forces Load distribution Concrete deck slabs Composite steel members Plate girder design Continuous beams Protecting steel superstructures Load rating Prestressed concrete Substructure design Abutments Piers Bearings Managing the design process Contract documents Bridge management systems
The state of the art in highway bridge engineering Fully updated with the latest codes and standards, including load and resistance factor design (LRFD), Bridge Engineering, Third Edition covers highway bridge planning, design, construction, maintenance, and rehabilitation. This thoroughly revised reference contains cutting-edge analytical, design, and construction practices, the most current information on new materials and methods, and proven, cost-effective maintenance and repair techniques. Real-world case studies and hundreds of helpful photos and illustrations are also included in this practical resource. BRIDGE ENGINEERING, THIRD EDITION FEATURES COMPLETE COVERAGE OF: Highway bridge structures Project inception Project funding Design standards Bridge inspection and site survey Physical testing As-built plans and other record data Superstructure types Deck types Wearing surface types Deck joint types Design loads Design methods Internal forces Load distribution Concrete deck slabs Composite steel members Plate girder design Continuous beams Protecting steel superstructures Load rating Prestressed concrete Substructure design Abutments Piers Bearings Managing the design process Contract documents Bridge management systems
Aimed at US audience - architects (113,000), civil engineers (228,000), and universities and colleges offering structural engineering programs. This work reflects the bridge design code changes and the newest ASCE [American Association of Civil Engineers] design methods. It uses SI units throughout for international usage.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.