Nonlinear models of microwave transistors are essential for the design of high-frequency nonlinear circuits, such as power amplifiers or mixers. Among the existing modeling techniques, measurement-based approaches have gained huge attention from researchers in the last decades. Especially, nonlinear measurements-driven model extraction is preferred for transistors exploited in the design of power amplifiers and mixers. This chapter mainly deals with the generation of empirical transistor models starting from large-signal time-domain waveforms. Specifically, a widely used model available in commercial CAD tools is adopted, and the extraction procedure of the model parameters is outlined in detail. Moreover the advantage of using time-domain waveforms at different frequencies is highlighted. More specifically, by making use of time-domain waveforms at frequencies in the kHz-MHz range, one can separately model the behavior of the transistor output current generator, which is more prone to low-frequency dispersive effects. In fact at low frequencies the effect of the nonlinear transistor capacitance is significantly reduced and, therefore, already “de-embedded” from the measured time-domain waveforms. Once the model of the output current generator is available, one can use high-frequency measurements to determine the nonlinear capacitances (or charges). Several modeling examples of different transistor technologies, such as gallium-arsenide and gallium-nitride, are reported.
Nonlinear models of microwave transistors are essential for the design of high-frequency nonlinear circuits, such as power amplifiers or mixers. Among the existing modeling techniques, measurement-based approaches have gained huge attention from researchers in the last decades. Especially, nonlinear measurements-driven model extraction is preferred for transistors exploited in the design of power amplifiers and mixers. This chapter mainly deals with the generation of empirical transistor models starting from large-signal time-domain waveforms. Specifically, a widely used model available in commercial CAD tools is adopted, and the extraction procedure of the model parameters is outlined in detail. Moreover the advantage of using time-domain waveforms at different frequencies is highlighted. More specifically, by making use of time-domain waveforms at frequencies in the kHz-MHz range, one can separately model the behavior of the transistor output current generator, which is more prone to low-frequency dispersive effects. In fact at low frequencies the effect of the nonlinear transistor capacitance is significantly reduced and, therefore, already “de-embedded” from the measured time-domain waveforms. Once the model of the output current generator is available, one can use high-frequency measurements to determine the nonlinear capacitances (or charges). Several modeling examples of different transistor technologies, such as gallium-arsenide and gallium-nitride, are reported.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.