When you purchase a product, you expect it to work. Construction workers on high-rise buildings need to be confident that their safety harnesses will arrest a fall. Firefighters need to know that their gloves and other protective equipment can withstand high temperatures. Healthcare workers administering highly toxic chemotherapy agents need to know that their gloves will withstand penetration. For personal protective technologies (PPT)-where the major purpose of the product is to protect the wearer against a hazard-a deficit in product effectiveness can mean injury, illness, or death. Examining the extent to which products meet specific performance or design criteria is the focus of conformity assessment efforts. For PPT conformity assessment, the ultimate goal is preventing worker illness, injury, or death from hazardous working conditions. Certifying Personal Protective Technologies focuses on conformity assessment for occupational PPT-ensuring that PPT are effective in preventing or reducing hazardous exposures or situations that workers face in their jobs. Because respirators already have an extensive testing and conformity assessment process in place, this book specifically addresses conformity assessment processes for other types of PPT, including eye and face protection, gloves, hearing protectors, and protective clothing.
Maintaining the health and safety of workers in the United States and globally is accomplished in part by reducing hazardous exposures through the use of personal protective equipment. Personal protective technologies (PPT) include respirators worn by construction workers and miners; protective clothing, respirators, and gloves worn by firefighters and mine rescue workers; and respirators and protective clothing worn by healthcare workers. An estimated 5 million workers are required to wear respirators in 1.3 million U.S. workplaces. For some occupations, such as firefighting, the worker's protective equipment is the only form of protection against life-threatening hazards; for other workers, the PPT is a supplement to ventilation and other environmental, engineering, or administrative hazard controls. In the United States, federal responsibility for civilian worker PPT is integral to the mission of the National Institute for Occupational Safety and Health (NIOSH). This book examines the NIOSH Personal Protective Technology Program (PPT Program) and specifically focuses on the relevance and impact of this program in reducing hazardous exposures and improving worker health and safety.
Respirators are used in a variety of workplaces including emergency response, mining operations, construction, manufacturing, and hospitals. In 2001, National Institute of Occupational Safety and Health (NIOSH) and Bureau of Labor Statistics commissioned a nationwide survey of respirator use in the workplace, the results of which were published in the 2003 report Respirator Usage in Private Sector Firms. The purpose of the survey was to evaluate respirator use and practices, including training practices and the value of respirator manufacturer's instruction, in order to help guide NIOSH respirator certification and research. This National Research Council (NRC) report evaluates the survey in terms of several measures such as the adequacy and appropriateness of the survey instrument, the survey methodology, data analysis, and the conclusions drawn from the data. The NRC report finds that the survey was an important first step in collecting respiratory protection data from a probability sample but that several improvements could be made in survey design and analysis. Based on the review of the survey, the NRC report concludes that data on respirator use would be best provided by employers and employees in the context of the work setting.
During an influenza pandemic, healthcare workers will be on the front lines delivering care to patients and preventing further spread of the disease. As the nation prepares for pandemic influenza, multiple avenues for protecting the health of the public are being carefully considered, ranging from rapid development of appropriate vaccines to quarantine plans should the need arise for their implementation. One vital aspect of pandemic influenza planning is the use of personal protective equipment (PPE)-the respirators, gowns, gloves, face shields, eye protection, and other equipment that will be used by healthcare workers and others in their day-to-day patient care responsibilities. However, efforts to appropriately protect healthcare workers from illness or from infecting their families and their patients are greatly hindered by the paucity of data on the transmission of influenza and the challenges associated with training and equipping healthcare workers with effective personal protective equipment. Due to this lack of knowledge on influenza transmission, it is not possible at the present time to definitively inform healthcare workers about what PPE is critical and what level of protection this equipment will provide in a pandemic. The outbreaks of severe acute respiratory syndrome (SARS) in 2003 have underscored the importance of protecting healthcare workers from infectious agents. The surge capacity that will be required to reduce mortality from a pandemic cannot be met if healthcare workers are themselves ill or are absent due to concerns about PPE efficacy. The IOM committee determined that there is an urgent need to address the lack of preparedness regarding effective PPE for use in an influenza pandemic. Preparing for an Influenza Pandemic : Personal Protective Equipment for Healthcare Workers identifies that require expeditious research and policy action: (1) Influenza transmission research should become an immediate and short-term research priority so that effective prevention and control strategies can be developed and refined. The current paucity of knowledge significantly hinders prevention efforts. (2) Employer and employee commitment to worker safety and appropriate use of PPE should be strengthened. Healthcare facilities should establish and promote a culture of safety. (3) An integrated effort is needed to understand the PPE requirements of the worker and to develop and utilize innovative materials and technologies to create the next generation of PPE capable of meeting these needs.
In 2009, the H1N1 influenza pandemic brought to the forefront the many unknowns about the virulence, spread, and nature of the virus, as well as questions regarding personal protective equipment (PPE) for healthcare personnel. In this book, the Institute of Medicine assesses the progress of PPE research and identifies future directions for PPE for healthcare personnel.
When you purchase a product, you expect it to work. Construction workers on high-rise buildings need to be confident that their safety harnesses will arrest a fall. Firefighters need to know that their gloves and other protective equipment can withstand high temperatures. Healthcare workers administering highly toxic chemotherapy agents need to know that their gloves will withstand penetration. For personal protective technologies (PPT)-where the major purpose of the product is to protect the wearer against a hazard-a deficit in product effectiveness can mean injury, illness, or death. Examining the extent to which products meet specific performance or design criteria is the focus of conformity assessment efforts. For PPT conformity assessment, the ultimate goal is preventing worker illness, injury, or death from hazardous working conditions. Certifying Personal Protective Technologies focuses on conformity assessment for occupational PPT-ensuring that PPT are effective in preventing or reducing hazardous exposures or situations that workers face in their jobs. Because respirators already have an extensive testing and conformity assessment process in place, this book specifically addresses conformity assessment processes for other types of PPT, including eye and face protection, gloves, hearing protectors, and protective clothing.
Maintaining the health and safety of workers in the United States and globally is accomplished in part by reducing hazardous exposures through the use of personal protective equipment. Personal protective technologies (PPT) include respirators worn by construction workers and miners; protective clothing, respirators, and gloves worn by firefighters and mine rescue workers; and respirators and protective clothing worn by healthcare workers. An estimated 5 million workers are required to wear respirators in 1.3 million U.S. workplaces. For some occupations, such as firefighting, the worker's protective equipment is the only form of protection against life-threatening hazards; for other workers, the PPT is a supplement to ventilation and other environmental, engineering, or administrative hazard controls. In the United States, federal responsibility for civilian worker PPT is integral to the mission of the National Institute for Occupational Safety and Health (NIOSH). This book examines the NIOSH Personal Protective Technology Program (PPT Program) and specifically focuses on the relevance and impact of this program in reducing hazardous exposures and improving worker health and safety.
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.