Extending the life of an airframe has proven challenging and costly. Extending the life of an avionics system, however, is one of the most critical and difficult aspects of extending total aircraft system lifetimes. Critical components go out of production or become obsolete, and many former suppliers of military-grade components have gone out of business. From 1986 to 1996, for example, the percentage of discontinued military/aerospace electronic devices nearly doubledâ€"from 7.5 percent to 13.5 percent. In addition, legacy avionics systems, which were designed to meet requirements of the past, generally lack the full capability to perform new missions, meet new threats, or perform well in the new information-intensive battlefield environments. As the legacy aircraft fleet ages, avionics systems will become more and more difficult to support and maintain. Whereas the military once provided a large and profitable market for the electronics industry, the military electronics market today constitutes less than 1 percent of the commercial market. As a result, the military must increasingly rely on commercial off-the-shelf (COTS) technologies for its avionics hardware and software. Although COTS items are generally less expensive than comparable items designed especially to meet military specifications, the technology-refresh cycle for COTS is typically 18 months or less, which exacerbates the obsolescence problem for aircraft whose lifetimes are measured in decades. The short refresh cycle is driven mostly by the tremendous advances in computer systems, which comprise an increasing percentage of avionics content. In response to a request by the Assistant Secretary of the Air Force for Acquisition, the National Research Council convened the Committee on Aging Avionics in Military Aircraft, under the auspices of the Air Force Science and Technology Board, to conduct this study. This report summarizes the following: Gather information from DoD, other government agencies, and industrial sources on the status of, and issues surrounding, the aging avionics problem. This should include briefings from and discussions with senior industry executives and military acquisition and support personnel. A part of this activity should include a review of Air Force Materiel Command's study on diminishing manufacturing sources to recommend ways to mitigate avionics obsolescence. Provide recommendations for new approaches and innovative techniques to improve management of aging avionics, with the goal of helping the Air Force to enhance supportability and replacement of aging and obsolescing avionics and minimize associated life cycle costs. Comment on the division of technology responsibility between DoD and industry.
Extending the life of an airframe has proven challenging and costly. Extending the life of an avionics system, however, is one of the most critical and difficult aspects of extending total aircraft system lifetimes. Critical components go out of production or become obsolete, and many former suppliers of military-grade components have gone out of business. From 1986 to 1996, for example, the percentage of discontinued military/aerospace electronic devices nearly doubledâ€"from 7.5 percent to 13.5 percent. In addition, legacy avionics systems, which were designed to meet requirements of the past, generally lack the full capability to perform new missions, meet new threats, or perform well in the new information-intensive battlefield environments. As the legacy aircraft fleet ages, avionics systems will become more and more difficult to support and maintain. Whereas the military once provided a large and profitable market for the electronics industry, the military electronics market today constitutes less than 1 percent of the commercial market. As a result, the military must increasingly rely on commercial off-the-shelf (COTS) technologies for its avionics hardware and software. Although COTS items are generally less expensive than comparable items designed especially to meet military specifications, the technology-refresh cycle for COTS is typically 18 months or less, which exacerbates the obsolescence problem for aircraft whose lifetimes are measured in decades. The short refresh cycle is driven mostly by the tremendous advances in computer systems, which comprise an increasing percentage of avionics content. In response to a request by the Assistant Secretary of the Air Force for Acquisition, the National Research Council convened the Committee on Aging Avionics in Military Aircraft, under the auspices of the Air Force Science and Technology Board, to conduct this study. This report summarizes the following: Gather information from DoD, other government agencies, and industrial sources on the status of, and issues surrounding, the aging avionics problem. This should include briefings from and discussions with senior industry executives and military acquisition and support personnel. A part of this activity should include a review of Air Force Materiel Command's study on diminishing manufacturing sources to recommend ways to mitigate avionics obsolescence. Provide recommendations for new approaches and innovative techniques to improve management of aging avionics, with the goal of helping the Air Force to enhance supportability and replacement of aging and obsolescing avionics and minimize associated life cycle costs. Comment on the division of technology responsibility between DoD and industry.
Advancing the state of aviation safety is a central mission of the National Aeronautics and Space Administration (NASA). Congress requested this review of NASA's aviation safety-related research programs, seeking an assessment of whether the programs have well-defined, prioritized, and appropriate research objectives; whether resources have been allocated appropriately among these objectives; whether the programs are well coordinated with the safety research programs of the Federal Aviation Administration; and whether suitable mechanisms are in place for transitioning the research results into operational technologies and procedures and certification activities in a timely manner. Advancing Aeronautical Safety contains findings and recommendations with respect to each of the main aspects of the review sought by Congress. These findings indicate that NASA's aeronautics research enterprise has made, and continues to make, valuable contributions to aviation system safety but it is falling short and needs improvement in some key respects.
As part of the national effort to improve aviation safety, the Federal Aviation Administration (FAA) chartered the National Research Council to examine and recommend improvements in the aircraft certification process currently used by the FAA, manufacturers, and operators.
The Principal Deputy to the Assistant Secretary of the Air Force for Acquisition requested that the National Research Council (NRC) review the Air Force's planned acquisition programs to determine if, given its scale, the highly talented scientific, technical, and engineering personnel base could be maintained, to identify issues affecting the engineering and science work force, and to identify issues affecting the aerospace industry's leadership in technology development, innovation, and product quality, as well as its ability to support Air Force missions.
High-speed flight is a major technological challenge for both commercial and business aviation. As a first step in revitalizing efforts by the National Aeronautics and Space Administration (NASA) to achieve the technology objective of high-speed air travel, NASA requested the National Research Council (NRC) to conduct a study that would identify approaches for achieving breakthroughs in research and technology for commercial supersonic aircraft. Commercial Supersonic Technology documents the results of that effort. This report describes technical areas where ongoing work should be continued and new focused research initiated to enable operational deployment of an environmentally acceptable, economically viable commercial aircraft capable of sustained supersonic flight, including flight over land, at speeds up to approximately Mach 2 in the next 25 years or less.
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.