Chris J.M. Verhoeven's Books

Structured Electronic Design

Negative-feedback amplifiers

By: Chris J.M. Verhoeven,Arie van Staveren,G.L.E. Monna,M.H.L. Kouwenhoven,E. Yildiz

Write a review Read reviews Take a Quiz Solve Book Puzzle

Structured Electronic Design

Negative-feedback amplifiers

By: Chris J.M. Verhoeven,Arie van Staveren,G.L.E. Monna,M.H.L. Kouwenhoven,E. Yildiz

Analog design is one of the more difficult aspects of electrical engineering. The main reason is the apparently vague decisions an experienced designer makes in optimizing his circuit. To enable fresh designers, like students electrical engineering, to become acquainted with analog circuit design, structuring the analog design process is of utmost importance. Structured Electronic Design: Negative-Feedback Amplifiers presents a design methodology for negative-feedback amplifiers. The design methodology enables to synthesize a topology and to, at the same time, optimize the performance of that topology. Key issues in the design methodology are orthogonalization, hierarchy and simple models. Orthogonalization enables the separate optimization of the three fundamental quality aspects: noise, distortion and bandwidth. Hierarchy ensures that the right decisions are made at the correct level of abstraction. The use of simple models, results in simple calculations yielding maximum-performance indicators that can be used to reject wrong circuits relatively fast. The presented design methodology divides the design of negative-feedback amplifiers in six independent steps. In the first two steps, the feedback network is designed. During those design steps, the active part is assumed to be a nullor, i.e. the performance with respect to noise, distortion and bandwidth is still ideal. In the subsequent four steps, an implementation for the active part is synthesized. During those four steps the topology of the active part is synthesized such that optimum performance is obtained. Firstly, the input stage is designed with respect to noise performance. Secondly, the output stage is designed with respect to clipping distortion. Thirdly, the bandwidth performance is designed, which may require the addition of an additional amplifying stage. Finally, the biasing circuitry for biasing the amplifying stages is designed. By dividing the design in independent design steps, the total global optimization is reduced to several local optimizations. By the specific sequence of the design steps, it is assured that the local optimizations yield a circuit that is close to the global optimum. On top of that, because of the separate dedicated optimizations, the resource use, like power, is tracked clearly. Structured Electronic Design: Negative-Feedback Amplifiers presents in two chapters the background and an overview of the design methodology. Whereafter, in six chapters the separate design steps are treated with great detail. Each chapter comprises several exercises. An additional chapter is dedicated to how to design current sources and voltage source, which are required for the biasing. The final chapter in the book is dedicated to a thoroughly described design example, showing clearly the benefits of the design methodology. In short, this book is valuable for M.Sc.-curriculum Electrical Engineering students, and of course, for researchers and designers who want to structure their knowledge about analog design further.

Average ratings

N/A

Write a review

Solve jigsaw puzzle

Age

Page Count

366

Publisher

Springer Science & Business Media

Published Date

ISBN 10

0306487322

ISBN 13

9780306487323

Oscillators and Oscillator Systems

Classification, Analysis and Synthesis

By: Jan R. Westra,Chris J.M. Verhoeven,Arthur H.M. van Roermund

Write a review Read reviews Take a Quiz Solve Book Puzzle

Oscillators and Oscillator Systems

Classification, Analysis and Synthesis

By: Jan R. Westra,Chris J.M. Verhoeven,Arthur H.M. van Roermund

In many electronic systems, such as telecommunication or measurement systems, oscillations play an essential role in the information processing. Each electronic system poses different requirements on these oscillations, depending on the type and performance level of that specific system. It is the designer's challenge to find the specifications for the desired oscillation and to implement an electronic circuit meeting these specifications. As the desired oscillations have to fulfill many requirements, the design process can become very complex. To find an optimal solution, the designer requires a design methodology that is preferably completely top-down oriented. To achieve such a methodology, it must be assured that each property of the system can be optimized independently of all other properties. Oscillators and Oscillator Systems: Classification, Analysis and Synthesis takes a systematic approach to the design of high-performance oscillators and oscillator systems. A fundamental classification of oscillators, based on their internal timing references, forms the basis of this approach. The classification enables the designer to make strategic design decisions at a high hierarchical level of the design process. Techniques, derived from the systematic approach, are supplied to the designer to enable him or her to bring the performance of the system as close as possible to the fundamental limits. Oscillators and Oscillator Systems: Classification, Analysis and Synthesis is an excellent reference for researchers and circuit designers, and may be used as a text for advanced courses on the topic.

Average ratings

N/A

Write a review

Solve jigsaw puzzle

Age

Page Count

289

Publisher

Springer Science & Business Media

Published Date

ISBN 10

1475761171

ISBN 13

9781475761177

Analysis and Design of Quadrature Oscillators

By: Luis B. Oliveira,Jorge R. Fernandes,Igor M. Filanovsky,Chris J. M. Verhoeven,Manuel M. Silva

Write a review Read reviews Take a Quiz Solve Book Puzzle

Analysis and Design of Quadrature Oscillators

By: Luis B. Oliveira,Jorge R. Fernandes,Igor M. Filanovsky,Chris J. M. Verhoeven,Manuel M. Silva

Modern RF receivers and transmitters require quadrature oscillators with accurate quadrature and low phase-noise. Existing literature is dedicated mainly to single oscillators, and is strongly biased towards LC oscillators. This book is devoted to quadrature oscillatorsand presents adetailed comparative study ofLC and RCosc- lators, both at architectural and at circuit levels. It is shown that in cross-coupled RC oscillators both the quadrature error and phase-noise are reduced, whereas in LC - cillators the coupling decreases the quadrature error, but increases the phase-noise. Thus, quadrature RC oscillators can be a practical alternative to LC oscillators, - pecially when area and cost are to be minimized. The main topics of the book are: cross-coupled LC quasi-sinusoidal oscillators, cross-coupled RC relaxation oscillators, a quadrature RC oscillator-mixer, and t- integrator oscillators. The effect of mismatches on the phase-error and the pha- noise are thoroughly investigated. The book includes many experimental results, obtained from different integrated circuit prototypes, in the GHz range. A structured design approach is followed: a technology independent study, with ideal blocks, is performed initially, and then the circuit level design is addressed. This book can be used in advanced courses on RF circuit design. In addition to post-graduate students and lecturers, this book will be of interest to design engineers and researchers in this area.

Average ratings

N/A

Write a review

Solve jigsaw puzzle

Age

Page Count

162

Publisher

Springer Science & Business Media

Published Date

ISBN 10

1402085168

ISBN 13

9781402085161

Structured Electronic Design

High-Performance Harmonic Oscillators and Bandgap References

By: Arie van Staveren,Chris J.M. Verhoeven,Arthur H.M. van Roermund

Write a review Read reviews Take a Quiz Solve Book Puzzle

Structured Electronic Design

High-Performance Harmonic Oscillators and Bandgap References

By: Arie van Staveren,Chris J.M. Verhoeven,Arthur H.M. van Roermund

Analog design still has, unfortunately, a flavor of art. Art can be beautiful. However, art in itself is difficult to teach to students and difficult to transfer from experienced analog designers to new trainee designers in companies. Structured Electronic Design: High-Performance Harmonic Oscillators and Bandgap References aims to systemize analog design. The use of orthogonalization of the design of the fundamental quality aspects (noise, distortion, and bandwidth) and hierarchy in the subsequent design steps, enables designers to achieve high-performance designs, in a relatively short time. As a result of the systematic design procedure, the effect of design decisions on the circuit performance is made clear. Additionally, the use of resources for reaching a specified performance is tracked. This book, therefore, describes the structured electronic design of high-performance harmonic oscillators and bandgap references. The structured design of harmonic oscillators includes the maximization of the carrier-to- noise ratio by means of tapping, i.e. an impedance adaption method for noise matching. The bandgap reference, a popular implementation of a voltage reference, is studied via the unusual concept of the linear combination of base-emitter voltages. The presented method leads to the design of high-performance references in CMOS and Bipolar technology. Using this concept, on a high level of abstraction the quality with respect to, for instance, noise and power-supply rejection can be identified. In this book, it is shown with several design examples that this method provides an excellent starting point for the design of high-performance bandgap references. Auxiliary to the harmonic-oscillator and bandgap reference design are the negative- feedback amplifiers. In this book the systematic design of the dynamic behavior is emphasized. By means of the identification of the dominant poles, it is possible to give an upper limit of the attainable bandwidth, even before the real frequency compensation is accomplished. Structured Electronic Design: High-Performance Harmonic Oscillators and Bandgap References is a valuable book for researchers and designers, as well as students in the field of analog design. It helps both the experienced and trainee designer to come to grips with the design of analog circuits. The presented method is illustrated by several well- described design examples.

Average ratings

N/A

Write a review

Solve jigsaw puzzle

Age

Page Count

294

Publisher

Springer Science & Business Media

Published Date

ISBN 10

0306481693

ISBN 13

9780306481697

Trade-Offs in Analog Circuit Design

The Designer's Companion

By: Chris Toumazou

Write a review Read reviews Take a Quiz Solve Book Puzzle

Trade-Offs in Analog Circuit Design

The Designer's Companion

By: Chris Toumazou

As the frequency of communication systems increases and the dimensions of transistors are reduced, more and more stringent performance requirements are placed on analog circuits. This is a trend that is bound to continue for the foreseeable future and while it does, understanding performance trade-offs will constitute a vital part of the analog design process. It is the insight and intuition obtained from a fundamental understanding of performance conflicts and trade-offs, that ultimately provides the designer with the basic tools necessary for effective and creative analog design. Trade-offs in Analog Circuit Design, which is devoted to the understanding of trade-offs in analog design, is quite unique in that it draws together fundamental material from, and identifies interrelationships within, a number of key analog circuits. The book covers ten subject areas: Design methodology, Technology, General Performance, Filters, Switched Circuits, Oscillators, Data Converters, Transceivers, Neural Processing, and Analog CAD. Within these subject areas it deals with a wide diversity of trade-offs ranging from frequency-dynamic range and power, gain-bandwidth, speed-dynamic range and phase noise, to tradeoffs in design for manufacture and IC layout. The book has by far transcended its original scope and has become both a designer's companion as well as a graduate textbook. An important feature of this book is that it promotes an intuitive approach to understanding analog circuits by explaining fundamental relationships and, in many cases, providing practical illustrative examples to demonstrate the inherent basic interrelationships and trade-offs. Trade-offs in Analog Circuit Design draws together 34 contributions from some of the world's most eminent analog circuits-and-systems designers to provide, for the first time, a comprehensive text devoted to a very important and timely approach to analog circuit design.

Average ratings

N/A