Army Tactics, Techniques, and Procedures (ATTP) 3-06.11 establishes doctrine for combined arms operations in urban terrain for the brigade combat team (BCT) and battalion/squadron commanders and staffs, company/troop commanders, small-unit leaders, and individual Soldiers. The continued trend worldwide of urban growth and the shift of populations from rural to urban areas continues to affect Army operations. The urban environment, consisting of complex terrain, dense populations, and integrated infrastructures, is the predominant operational environment in which Army forces currently operate. Each urban environment is unique and differs because of the combinations presented by the enemy, the urban area itself, the major operation of which it may be part (or the focus), and always changing societal and geopolitical considerations. Enemy forces will take advantage of this complex environment by intermingling with the populace. ATTP 3-06.11 describes the fundamental principles, tactics, techniques, and procedures (TTP) of urban operations (UO) across full spectrum operations, using the UO operational construct (understand, shape, engage, consolidate, and transition) to outline the discussions. ATTP 3-06.11 is based on current BCT structure and lessons learned from ongoing UO. ATTP 3-06.11 primarily addresses offensive and defensive operations in an urban environment. Stability operations are briefly discussed in the context of transition considerations. Stability operations are inherently among the people and generally in urban environments. Field manual (FM) 3-07 is the source manual for stability doctrine and addresses BCT considerations for conducting stability UO. FM 3-07.1 is the primary source for BCT and below considerations for interaction and support to host nation (HN) security forces. This material is not repeated in ATTP 3-06.11. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC). The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE). Urban operations are among the most difficult and challenging missions a BCT can undertake. Most UO are planned and controlled at division or corps level but executed by BCTs. The unified action environment of UO enables and enhances the capabilities of the BCT to plan, prepare, and execute offensive, defensive, and stability operations. Urban operations are Infantry-centric combined arms operations that capitalize on the adaptive and innovative leaders at the squad, platoon, and company level. Combined arms is the synchronized and simultaneous application of the elements of combat power to achieve an effect greater than if each element of combat power was used separately or sequentially. The eight elements of combat power are leadership, information, movement and maneuver, intelligence, fires, sustainment, mission command, and protection. Leadership and information are applied through, and multiply the effects of, the other six elements of combat power. These six-movement and maneuver, intelligence, fires, sustainment, mission command, and protection-are collectively described as the warfighting functions. (See FM 3-0 for details.) The BCT is the Army's largest fixed combined arms organization and the primary close combat force. A key component in UO is the inherent ability of the BCT to tailor its force to meet the requirements of the urban environment. This introduction provides an overview of UO considerations that shape the subsequent discussions of operations at BCT and below.
The U.S. military does not believe its soldiers, sailors, airmen, and marines should be engaged in combat with adversaries on a "level playing field." Our combat individuals enter engagements to win. To that end, the United States has used its technical prowess and industrial capability to develop decisive weapons that overmatch those of potential enemies. In its current engagement-what has been identified as an "era of persistent conflict"- the nation's most important weapon is the dismounted soldier operating in small units. Today's soldier must be prepared to contend with both regular and irregular adversaries. Results in Iraq and Afghanistan show that, while the U.S. soldier is a formidable fighter, the contemporary suite of equipment and support does not afford the same high degree of overmatch capability exhibited by large weapons platforms-yet it is the soldier who ultimately will play the decisive role in restoring stability. Making the Soldier Decisive on Future Battlefields establishes the technical requirements for overmatch capability for dismounted soldiers operating individually or in small units. It prescribes technological and organizational capabilities needed to make the dismounted soldier a decisive weapon in a changing, uncertain, and complex future environment and provides the Army with 15 recommendations on how to focus its efforts to enable the soldier and tactical small unit (TSU) to achieve overmatch.
This training circular (TC) is a tool commanders can use during training strategy development. The products in this TC are developed to support the commanders mission-essential task list (METL) training strategy. This TC provides guidance for commanders, staff, leaders, and Soldiers who plan, prepare, execute, and assess training of the reconnaissance troop. The primary target audience for this publication is the troop commander, staff, and other leaders within the reconnaissance troop. The secondary audience consists of training developers who develop training support materials for professional military education (PME). This publication applies to the Active Army, Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC). The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE).
ADP 3-37 Protection provides guidance on protection and the protection warfighting function. It establishes the protection principles for commanders and staffs who are responsible for planning and executing protection in support of unified land operations. The synchronization and integration of protection tasks enable commanders to safeguard bases, secure routes, and protect forces. The principal audience for ADP 3-37 is commanders and staffs. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. In addition, trainers and educators throughout the Army will use this manual as a doctrinal reference for protection.Protection is the preservation of the effectiveness and survivability of mission-related military and nonmilitary personnel, equipment, facilities, information, and infrastructure deployed...
ATTP 3-21.50 provides perspective on Infantry company missions in an operational environment characterized by high-altitudes, rapidly changing climatic conditions, and rugged terrain. It also provides the small-unit leader with guidance on how company-sized units and below can conduct these operations. The mountain environment challenges all warfighting functions. Infantry units are full spectrum organizations, not specifically designed for mountain terrain but are well-suited for mountain operations. Successful units combine the basic doctrine described in FM 3-21.10 and augment with specialized equipment and predeployment training. The tactics and techniques specific to conducting operations in mountain terrain provide added operational capability. Table 6-3 in this manual depicts where Soldiers may obtain specialized mountaineering and cold weather operational skills. This manual focuses on company and below operations in mountain operational terrain levels II and III as described in FM 3-97.6, specifically, where the influence of increasingly steep and rugged terrain dictates the use of dismounted operations. For mountain operations in level I (lower, less rugged valleys and flatter terrain) refer to FM 3-21.10. The concepts discussed in this publication are useful in most mountain environments. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent of this publication is the United States Army Training and Doctrine Command (TRADOC). The preparing agency is the US Army Maneuver Center of Excellence (MCoE).
Training Circular (TC) 3-21.76 uses joint terms where applicable. Selected joint and Army terms and definitions appear in both the glossary and the text. Terms for which TC 3-21.76 is the proponent publication (the authority) are italicized in the text and are marked with an asterisk (*) in the glossary. Terms and definitions for which TC 3-21.76 is the proponent publication are boldfaced in the text. For other definitions shown in the text, the term is italicized and the number of the proponent publication follows the definition. The principal audience for TC 3-21.76 are U.S. Army Rangers and combat arms units. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication.
The principal audience for this publication Training Circular TC 3-21.76 The Ranger Handbook are U.S. Army Rangers and combat arms units. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters, trainers, and educators throughout the Army will also use this publication. The Ranger Handbook is mainly written for U.S. Army Rangers and other light Infantry units, however it should also serve as a handy reference for other U.S. military units as it contains a summary of other manuals such as ATP 3-21.8, ADP 6-22, ATP 3-21.10 ADRP 3-0, ATTP 3-06.11, ATP 4-01.45, FM 6-22, FM 22-100, FM 3-21.8, FM 7-8, FM 3-21.10, FM 7-10, FM 3-90, and FM 3-55.93. It covers how Infantry squad- and platoon-sized elements conduct combat operations in varied terrains. It cites other Army resources to ensure continuity. This handbook provides squad and platoon
TC 3-22.9 Rifle and Carbine is the May 2016 revision of FM 3-22.9 Rifle Marksmanship. This revision brings TC 3-22.9 in line with Doctrine 2015. This is the definitive basic and advanced rifle marksmanship manual utilized by the United States Army. A must have for all Soldiers.
Rifle Marksmanship is the newly revised, official guide to planning and executing training on the M16-series rifles (M16A1, M16A2, M16A3, and M16A4) and M4 carbine. This handbook is developed by the US Army for commanders, leaders, and instructors to help create training programs and materials for soldiers to complete the United States Army rifle marksmanship program. It offers a comprehensive guide to the specifics and capabilities of each weapon and an introduction to the fundamentals of marksmanship, followed by complete guidance through each of the five stages of rifle marksmanship training. Topics covered include: Weapon Characteristics, Accessories, and Ammunition Range Safety and Risk Management Preliminary Marksmanship and Mechanical Training Advanced Optics, Lasers, and Iron Sights 10-Meter Target Offsets and 25-Meter Zero Offsets Training Aids, Devices, and Scorecards Replete with information and training materials for learners and instructors, this handbook provides the guidance for all shooters, whether in combat or in hunting and recreation, to operate their rifles with deadly proficiency.
The U.S. Army War College (USAWC) is proud to present the 28th Edition of How the Army Runs: A Senior Leader Reference Handbook, 2011-2012. Publication of this text at this time, when the Army has been at war for almost a decade, has almost completed restructuring of its operating force, and is addressing the structure of the generating force, as well as completing formidable base closure and restationing actions, gives credence to the enduring truth that in order to be successful the Army must sustain and improve itself while it is fully committed to the Nation's bidding. The systems and processes documented and explained in this work are designed to do just that. This text was prepared under the direction of the faculty of the Department of Command, Leadership, and Management. It is intended to be used in an academic environment during the study of the systems and processes used to develop and sustain trained and ready combat forces to be used by the Combatant Commanders.
The Official U.S. Army Pistol Training Manual provides the framework for training and using a service pistol, including equipment, ammunition, and shooting. The book is tailored to an individual's use of the M9 service pistol, including specific information about the weapon, aiming devices, attachments, stability, control, and safety, as well as its use. The book is organized in a progressive manner, each chapter or appendix building on the information from the previous section.
TC 3-21.5 Drill and Ceremonies covers all positions, commands, and structure for military drill and ceremonies conducted by and within the United States Army. This is an essential reference manual for leaders at all levels.
The mission of the United States Army is to fight and win our nation's wars by providing prompt, sustained land dominance across the full range of military operations and spectrum of conflict in support of combatant commanders. Accomplishing this mission rests on the ability of the Army to equip and move its forces to the battle and sustain them while they are engaged. Logistics provides the backbone for Army combat operations. Without fuel, ammunition, rations, and other supplies, the Army would grind to a halt. The U.S. military must be prepared to fight anywhere on the globe and, in an era of coalition warfare, to logistically support its allies. While aircraft can move large amounts of supplies, the vast majority must be carried on ocean going vessels and unloaded at ports that may be at a great distance from the battlefield. As the wars in Afghanistan and Iraq have shown, the costs of convoying vast quantities of supplies is tallied not only in economic terms but also in terms of lives lost in the movement of the materiel. As the ability of potential enemies to interdict movement to the battlefield and interdict movements in the battlespace increases, the challenge of logistics grows even larger. No matter how the nature of battle develops, logistics will remain a key factor. Force Multiplying Technologies for Logistics Support to Military Operations explores Army logistics in a global, complex environment that includes the increasing use of antiaccess and area-denial tactics and technologies by potential adversaries. This report describes new technologies and systems that would reduce the demand for logistics and meet the demand at the point of need, make maintenance more efficient, improve inter- and intratheater mobility, and improve near-real-time, in-transit visibility. Force Multiplying Technologies also explores options for the Army to operate with the other services and improve its support of Special Operations Forces. This report provides a logistics-centric research and development investment strategy and illustrative examples of how improved logistics could look in the future.
Army Regulation 350-1 is the keystone training regulation for all US Army units. This regulation is the source reference for all training conducted within units across the US Army. This continent 6x9 paperback is designed with commanders, executive officers, and company grade NCOs in mind for portability and ease of use.
The Army physician assistant (PA) has an important role throughout Army medicine. This handbook will describe the myriad positions and organizations in which PAs play leadership roles in management and patient care. Chapters also cover PA education, certification, continuing training, and career progression. Topics include the Interservice PA Program, assignments at the White House and the Old Guard (3d US Infantry Regiment), and roles in research and recruiting, as well as the PA’s role in emergency medicine, aeromedical evacuation, clinical care, surgery, and occupational health. More titles produced by the US Army, Borden Institute can be found here: https://bookstore.gpo.gov/agency/borden-institute Check out our Healthcare Teamwork & Patient Safety resources collection here: https://bookstore.gpo.gov/catalog/healthcare-teamwork-patient-safety-teamstepps Best Care Everywhere can be found here: https://bookstore.gpo.gov/products/best-care-everywhere
The Army Research Laboratory (ARL) is the corporate laboratory for the U.S. army, which bridges scientific and military communities. The ARL is critical in maintaining the United States' dominant military power through its advanced research and analysis capabilities. The National Academies of Sciences, Engineering, and Medicine's Army Research Laboratory Technical Assessment Board (ARLTAB) conducts biennial assessments of the scientific and technical quality of the facilities. These assessments are necessary to ensure that the ARL's resources and quality of programs are maximized. 2017-2018 Assessment of the Army Research Laboratory includes findings and recommendations regarding the quality of the ARL's research, development, and analysis programs. The report of the assessment is subdivided by the ARL's Science and Technology campaigns, including Materials Research, Sciences for Lethality and Protection, Information Sciences, Computational Sciences, Sciences for Maneuver, Human Sciences, and Analysis and Assessment. This biennial report summarizes the findings for the 2017-2018 period.
This text explains and synthesizes the functioning and relationships of numerous Defense, Joint, and Army organizations, systems, and processes involved in the development and sustainment of trained and ready forces for the Combatant Commanders. It is designed to be used by the faculty and students at the U.S. Army War College (as well as other training and educational institutions) as they improve their knowledge and understanding of "How the Army Runs." We are proud of the value that senior commanders and staffs place in this text and are pleased to continue to provide this reference.
This training circular, TC 3-21.90 Mortar Platoon Collective Task Publication, is a tool that platoon leaders can use as an aid during training strategy development. The products in this TC are developed to support the battalion's mission plan. This TC provides guidance for platoon leaders, leaders, and Soldiers who are responsible for planning, preparing, executing, and assessing training of the mortar platoon. This publication applies to the Active Army, the Army National Guard (ARNG), Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The primary target audience for this TC is the platoon leader and other leaders within a mortar platoon. The secondary audience comprises training developers involved in developing training support materials for professional military education. The proponent for this publication is the U.S. Army Training and Doctrine Command. The preparing agency is the U.S. Army Maneuver Center of Excellence.
This Army and Marine Corps multiservice publication serves as doctrinal reference for the employment of mortar squads, sections, and platoons. It contains guidance on tactics and techniques that mortar units use to execute their part of combat operations described in battalion-, squadron-, troop-, and company-level manuals. This publication also contains guidance on how a mortar unit's fires and displacement are best planned and employed to sustain a commander's intent for fire support. The target audience of this publication includes mortar squad, section, and platoon leaders, company and battalion commanders, battalion staff officers, and all others responsible for controlling and coordinating fire support during combined arms operations. Training developers also use this manual as a source document for combat critical tasks. Combat developers use this manual when refining and revising operational concepts for Infantry and reconnaissance mortar organizations. This publication serves as the primary reference for both resident and nonresident mortar tactical employment instruction.
This manual (ATTP 3-18.12) describes how brigade combat teams (BCTs) and combat aviation brigades (CABs) plan, prepare, and conduct air assault operations. It emphasizes the coordination necessary between these organizations in regards to the planning, preparation, and tactical employment of both elements. The target audience for this manual is commanders; leaders; and staffs at brigade, battalion, and company level. However, this manual applies to other organizations that are required to plan and operate as part of an air assault task force (AATF). This manual provides these leaders with descriptive guidance on how units plan, prepare, and execute tactical level air assault operations within offense, defense, stability, and civil support operations. This manual applies to the Active Army, the Army National Guard/Army National Guard of the United States, and the U.S. Army Reserves unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command. The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE).
A. The Appropriations Process. 1. U.S. Constitution, Art. I, § 8, grants Congress the ". . . power to lay and collect Taxes, Duties, Imposts, and Excises, to pay the Debts and provide for the common Defence and general Welfare of the United States . . . ." 2. U.S. Constitution, Art. I, § 9, provides that "[N]o Money shall be drawn from the Treasury but in Consequence of Appropriations made by Law." B. The Supreme Court's Fiscal Philosophy: "The established rule is that the expenditure of public funds is proper only when authorized by Congress, not that public funds may be expended unless prohibited by Congress." United States v. MacCollom, 426 U.S. 317 (1976).
Training Circular (TC) 3-22.23 provides technical information about training and employment of M18A1 claymore munitions. Intended users include leaders and Soldiers who use this information to successfully integrate M18A1 claymore munitions into their combat operations. The electrical system used to fire the M18A1 claymore munition has been replaced by a nonelectrical system, a shock tube assembly with pull initiator; however, M18A1 claymore munitions equipped with electrical firing systems will remain in the Army inventory until the current stock is exhausted. This TC applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated.
This training circular provides all Soldiers the doctrinal basis for the Warrior Ethos, Warrior Tasks, and other combat-critical tasks. It also updates weapon, equipment, and munitions information. This FM is not intended to serve as a stand-alone publication. It should be used with other Army publications that contain more in-depth information. Fully illustrated throughout.
This training circular details techniques Soldiers and leaders must know to cope with mountainous terrain. These techniques are the foundation upon which the mountaineer must build. They must be applied to the various situations encountered to include river crossings, glaciers, snow-covered mountains, ice climbing, rock climbing, and urban vertical environments. The degree to which this training is applied must be varied to conform to known enemy doctrine, tactics, and actions. This TC also discusses basic and advanced techniques to include acclimatization, illness and injury, equipment, anchors, evacuation, movement on glaciers, and training.
Training Circular TC 3-20.98 Reconnaissance Platoon Collective Task Publication offers guidance to the reconnaissance platoon leader and the troop commander on training the critical combat operations the platoon will be called on to perform. It provides tasks, conditions, and standards in the form of training and evaluation outlines (T&EOs) for collective tasks, which are the building blocks for all operations. This training circular (TC) is a tool commanders can use during training strategy development. The products in this TC are developed to support the plan. This TC provides guidance for platoon leaders, leaders, and Soldiers, who plan, prepare, execute, and assess training of the reconnaissance troop. The primary target audience for this TC is the platoon leader, and other leaders within a reconnaissance platoon. The secondary audience comprises training developers who develop training support materials for professional military education (PME). This publication applies to the Active Army, Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC). The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE).
This will help us customize your experience to showcase the most relevant content to your age group
Please select from below
Login
Not registered?
Sign up
Already registered?
Success – Your message will goes here
We'd love to hear from you!
Thank you for visiting our website. Would you like to provide feedback on how we could improve your experience?
This site does not use any third party cookies with one exception — it uses cookies from Google to deliver its services and to analyze traffic.Learn More.